1. Download Proteus 7.6 SP4 from here
2. Download Patch and proxy-license from here
3. Make sure you have uninstalled any previous versions of Proteus from your system
4. Install Proteus 7.6 SP4 from setup.exe file. Next->Yes->Next
5. If you didn’t install it before, you will notice that there is no license file exist.
If you installed it before you will automatically find the license.
But ensure that it is valid and not expired. And if it is invalid, you must do the step in the notes bellow.
So, press Next
6. From the dialog appeared select browse for key file.
You will find the license file in the crack folder that you’ve downloaded at step[2] select the license file “Sonsivri”
Then select open:
7. Select install
8. Select Yes then Close
9. Ensure that the Expiry date is 1/1/2030
10. Next->Next->Next->Next
11. Finish
==================================================================
To install crack/patch:
1. Restart your system
2. Disable your Antivirus. Do not panick
License.patch rar file does not contain any viruses.
Its False detection. Do not unpack patch file until antivirus is disabled
3. Paste the file into the Program installation folder in program files: example - "C:\Program Files\Labcenter Electronics\Proteus 7 Professional" 4. Run the Patch file and press Patch Note: for windows Vista and windows 7 you must run it as an administrator by right click on the file and select "run as an administrator". 5. A message will appear asking for a missing file "ISIS.EXE". So, go to: "C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN" and point to the file 6. Another message asking for a missing file "82XX.DLL" so, go to "C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS" and point to the file 7. Exit ================================================================================= Now Run it as ISIS7 Enjoy your Fully-Functional Proteus 7.6 SP4 Like and Comment for improvement of future posts - Nishant Nath
useless, compiler won’t work for 64bit, why did you lie?! I’ve uninstalled v7.7 to install your download because you’ve stated that it would be supported on 64 bit systems.
LikeLike
The software works perfectly fine n x64 OS (WIN7).
I have been using it since long time.
If its not running on your system i suggest you to do the following:
1. Delete all registry entries and folders from c: of any previous proteus installations
(I am sure you hadn’t done that… its bound to fail to run)
2. run disk-clean-up utility to clean all temp files and setup logs
3. Re-install
Hope that helps
LikeLike
hi why i cant find module TX on this isis
LikeLike
thanx a lot
LikeLike
TQ bro, for your instruction installer. I can Run my protuse now, but sorry to say your instruction must be detail step by step that people can understand exmple: Mr Or, maybe got confuse with your instruction.
What ever, TQ for sharing this information. I’m appreciate.
LikeLike
Great…………………………..
Thanks a lot becase i have install it…………………..
LikeLike
Hey’ nishanth
thanx man really…great…it worked for me..
for those who still have problems after following the above procedure:
if you have installed proteus:
$uninstall proteus(type uninstall a program in search box and then click it and then select proteus then click uninstall/change)
$ type disk cleanup in your searchbox and select c drive and then clean it.it will delete your temporary files.
$ then turn off your antivirus(after installation you can turn it on)then use patch…
The reason ypu cannot patch is that your antivirus is on and thats all..
regards,
ishan
LikeLiked by 1 person
Hey Thanks alot…
You rally done a great work…
Thanks once more…
Regards
Akshay Daga
LikeLike
hey i could’nt istall this version, why??
LikeLike
please elaborate your issue
LikeLike
I’ve installed and patched the way instructed here. It works. but when I run the ISIS 7, it only run for 15 to 30 minutes. after that, the ISIS window dissapear. why?? any help please!!
LikeLike
Try leaving it idle for 1 hour and see if it doesn’t disappear – its an issue during runtime – running out of memory or overloading.
LikeLike
Огромное спасибо !
English Translation: thank you so much !
LikeLike
patch dsnt work i tried it says file is opened i had rebooted but dsnt change a hng help me bro
LikeLike
antivirus ws off
LikeLike
Please don’t forget to right click the patch file and “run as an administrator” instead of double clicking it. If you run direct in win 64 it won’t work
LikeLike
Yo Man !
I have tried all day long for installing the ISIS.
Downloaded Multiple Setups but the error ” main file updating failed if file is running” kept pooping up.
But “Running as Administrator” have solved the problem
Thanks Lynn
LikeLike
Hey I followed all the steps and installed proteus successfully. But when I am using it closes all of a sudden without any warning…is there any patch/fix for that…
LikeLike
@Nischal please check if you have followed step 3 of installing patch/crack and also you are running the patch by using ‘Run As Administrator’ option
LikeLike
how i delete all registry entries for proteus?
LikeLike
Manual Process:
On Win7 : search regedit after clicking on the Windows Orb
On Win XP : type regedit at the cmd prompt after clicking run
Use find option using keyterms ‘isis’ and ‘proteus’ and delete each entry
Easier Process:
Use a software tool like CCleaner or Tune Up Utilities or some other for complete uninstall followed by registry cleaning tool.
LikeLike
Im using windows 8 , I installed proteus and then manually inputed the license , when I tried to enter to ISIS it appeared a message that said invalid license , so then I read that I needed to patch the program so Im trying to do that but when i search for the files they ask for it says something like its on use or it cant be found , any ideas how to fix that ?
LikeLike
Have you patched after pasting the contents of License.patch.rar here:
C:\Program Files\Labcenter Electronics\Proteus 7 Professional
And run the patch file using ‘Run As Administrator’ option ?
LikeLike
thnx bro finally it works
LikeLike
works/ tnx
LikeLike
you are my hero sir
LikeLike
thanx a lotttttt bro……we have been suffering a lot for it……bt u made it possible..thanx bro…god bless
LikeLike
hey i have installed proteus 7.6 with all settings what you all mentioned. but when i put the components the isis professional disappears and it also repeats even after 15min, i have uninstalled many times and re installed with all settings but the problem still repeats. please help me what to do.
LikeLike
hi reshma,
It could be an improper patching or problem with the dll files. Can’t say for sure.
By isis professional disappears did you mean the window crashes? or something else?
>> In case of improper patching please check if you patched after pasting the contents of License.patch.rar here:
C:\Program Files\Labcenter Electronics\Proteus 7 Professional
And run the patch file using ‘Run As Administrator’ option ?
(A very common error caused by most people)
>> In case its the problems with dll files use a dll files fixer.
>> you could also be having problems with your display adaptor, follow these steps to overcome them:
open ISIS and go to system menu -> set display options,
there are three options there choose among them and see which works best.
windows GDI
double buffer
openGL
>> Its been also known that certain time-zones settings can crash ISIS. Is your system set to INDIA Time Zone? If not set it at boot-startup.
Hope that helps
Nishant Nath
LikeLike
thanks for your replay
i have tried all what you have told me to do.the patching is done in the same way what you said and i used dll files fixer too, changed the system display settings the time zone is the same of India time zone, but the problem repeats the isis window would goes invisible after 15-20 mintues and the file does not contains what i done before. would you please tell me any other software where i can simulate the micro controllers. please help me
thank you
LikeLike
Hi,
If old installation is present then simply uninstall it from your computer. The follow the steps below
Download the software and patch from the give links
a. Download Proteus 7.6 SP4 from here >> http://www.mediafire.com/?q0ywmihyngw#1
b. Download Patch and proxy-license from here >> http://www.mediafire.com/?mnqnmiynjmy
c. unrar and begin
1. install setup76 Sp4.exe as administrator
2. next and …
3. go to C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\BIN
4. run LICENCE.EXE as administrator
5. select the key Sonsivri.lxk file from its source path
6. after successfull license key installation
7. copy proteus.pro.7.6.sp4-patch.exe onto C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\BIN\ folder
8. run proteus.pro.7.6.sp4-patch.exe the file as administrator
9. patch
10. select yes to browse for 82XX.DLL
11. select the path C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\MODELS\
12. select 82XX.DLL
13. open
14. patch complete successfully
15. run ISIS as administrator
16. done.
LikeLike
I tried to install Proteus 7.6 for win7 64bit which has expired licese key which i didnt recognise and tried to install it with expired license key and because of that it didnt install properly… Now I removed all the files related to this proteus… As it didnt install successfully so i didnt found this file in control panel to uninstall… I delete all the temp file and cleaned the disk. Later i downloaded 7.6sp4 and patch file. bt at the time of running the setup it is taking previous license key. And my set up is failed.. So how can i delete my previous proteus license key… Help me… It is throwing the error msg stating that model\ADC083x.dll file is missing
LikeLike
Hi Ashwini,
Its most probably due to some file remaining in in your registry.
Delete the folder ISIS or Proteus (Installation folder from progam files or program files (x86))
Go to (Windows 7)Orb -> Search for Regedit -> Go to find option and search for all entries with name ISIS or proteus … keep finding each such entry and delete all of them. Exercise caution because at time ISIS will be found in words like CRISIS … so delete only those with exactly the word ISIS. Run disk clean up after that and restart system then re-install choose a different location like ISIS1 instead of simply ISIS which is the default.
LikeLike
Thank u sooooooooo much for your help…. Finally I successfully finished up with my set up….
I made Two mistakes at the time running the set up 1) I accept expired license, which later i deleted that from registry i.e.C:\Windows\REGEDIT 2) I didnt disabled my quick heal thats y it is blocking my MODELS file to be install…. Now both the issues are resolved… I hope it will work fine….. I learnt couple of things from my mistakes… It feels so g8 wen u achieved something by doing hard work……
LikeLike
Hi, when I was patch the dll file, all the dll files were failed to patching except licence.dll. What to do?
Thanks.
LikeLike
Old versions of licenses of proteus may exist in your system or you could have missed a crucial step. (have you followed exactly as per the order below)
To install crack/patch:
1. Restart your system
2. Disable your Antivirus. Do not panick
License.patch rar file does not contain any viruses.
Its False detection. Do not unpack patch file until antivirus is disabled
3. Paste the file into the Program installation folder in program files:
example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
4. Run the Patch file and press Patch
Note: for windows Vista and windows 7 you must run it as an administrator
by right click on the file and select “run as an administrator”.
5. A message will appear asking for a missing file “ISIS.EXE”. So, go to:
“C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN” and point to the file
6. Another message asking for a missing file “82XX.DLL” so, go to
“C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS” and point to the file
7. Exit
If it still fails try the process i suggested to Ashwini (it worked)
Delete the folder ISIS or Proteus (Installation folder from progam files or program files (x86))
Go to (Windows 7)Orb -> Search for Regedit -> Go to find option and search for all entries with name ISIS or proteus … keep finding each such entry and delete all of them. Exercise caution because at time ISIS will be found in words like CRISIS … so delete only those with exactly the word ISIS. Run disk clean up after that and restart system then re-install choose a different location like ISIS1 instead of simply ISIS which is the default.
LikeLike
i install proteus 7.6 but one problem i faced. the memory could not read error are occur pls help me……..
LikeLike
Hi Sanjay,
Please elaborate your issue.
LikeLike
Great great!!!
It’s works !!
Thank you
LikeLike
I have a problem about installing path which say can not access the file Maybe it’s in use Please close the file before patching
LikeLike
OK i did it i forgot ” run it as an adminisstator “
LikeLike
close the isis.exe from task manager and repatch
LikeLike
When i install proteus then display .bad product key; what shuld i do
LikeLike
Did you copy the files into the Program installation folder in program files:
example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
and also run the patch file by right clicking -> Run as administrator ??
To install crack/patch:
1. Restart your system
2. Disable your Antivirus. Do not panick
License.patch rar file does not contain any viruses.
Its False detection. Do not unpack patch file until antivirus is disabled
3. Paste the file into the Program installation folder in program files:
example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
4. Run the Patch file and press Patch
Note: for windows Vista and windows 7 you must run it as an administrator
by right click on the file and select “run as an administrator”.
5. A message will appear asking for a missing file “ISIS.EXE”. So, go to:
“C:\Program Files\Labcenter Electronics\Proteus 7 Professional\BIN” and point to the file
6. Another message asking for a missing file “82XX.DLL” so, go to
“C:\Program Files\Labcenter Electronics\Proteus 7 Professional\MODELS” and point to the file
7. Exit
LikeLike
Awesome!!after cracking my head for 2 full days I got it!!!
LikeLike
Glad my post could be of help to you 🙂
LikeLike
why restart needs before installing the patch file of isis 7
LikeLike
Sometimes ISIS.exe remains in background and this creates problems during patching. You may proceed without restart by verifying no process similar to ISIS.exe is active through the process tab in Task Manager
LikeLike
I followed all the steps.Pasted the patch file as mentioned and tried to run it as admin but a distorted window appears and i could manage to read “ISIS.EXE” and nothing happens after that. There a two options below which say patch and about but none of them work. What should i do ??
LikeLike
You have to locate the two files and patch accordingly. please see the process in the post. It could also be an issue with the graphics driver as the window shows distorted for you.
LikeLike
thanq so much nishanth!!!!!!!!!!…..
i have tried for proteus so many times with other soft wares.but those are not supported.finally i installed this soft ware and its working properly………….
i am very happy………once again thax
LikeLike
glad to be of help 🙂
LikeLike
Thanks bud! It really works.
LikeLike
does this setup work for windows 8 also?
I have proteus 7.6 SP0(I am not sure for SP version) that I have downloaded from this site only. I was working with it since last 6 years on windows XP and windows 7. it was really fine. but now I have windows 8. the software is installed correctly and also runs on windows 8. but after few minutes it terminates and gives error as “ISIS.exe has stopped unexpectedly”.
so please help me.
LikeLike
Haven’t confirmed on Windows8. Will update as soon as i am able to confirm 🙂
LikeLike
thanks for replying ASAP. i m downloading this given version and trying it on my win 8. if it works then well n good but if not then pls do me a favor and find the solution
LikeLike
i hv installed the software on win8 n it works. thank….now if possible
please try to find out the solution for this virus problem. patch file is ” trojen” thats why its creating problem in antivirus.
LikeLike
Hi Ashutosh,
The trojan detection is a false alarm. It doesn’t get detected with my Kaspersky IS … but gets detected on most free antivirus/ free versions of them like avira, avast, quickheal etc
LikeLike
i am not able to install proteus 7.6 sp4 while patching it shows main file updating failed, operation cancelled…………….plzz help me out
please give me your email id…………..i need your help urgently
LikeLike
Hi Nipun,
Common oversights in patching process:
1. Have you disabled your antivirus then started the patching process?
2. Had you copied the patch file as mentioned in process:
Paste the file into the Program installation folder in program files:
example – “C:\Program Files\Labcenter Electronics\Proteus 7 Professional”
Run the Patch file and press Patch
3. Had you started the installer/patching tool as administrator (Right click – > Run as admin)
Regards
Nicky 🙂
LikeLike
Thanks. That was my problem. I was not running the patch as admin. 🙂
LikeLike
Thanks. I was not runnung the patch as root.
LikeLike
thanks nishant for the solution………
the proteus is properly installed and working fine.
thanks a lot
LikeLike
heya bro,
thanks for the files and procedure.I have installed every thing right but I am facing a problem will debugging the circuit I have drawn.It is showing an error %USWERPROFILE%\AppData\Local\Temp\LISA8439.SDF I dont know what went wrong…plz help….
LikeLike
Not able to pinpoint exactly what error you are refering to but most probably … it is because of corruption of the user profile, sometimes happens for no specific reason. You can try making the circuit from scratch / clearing your proteus & windows temp folders.
A screenshot of the error will be more helpful in troubleshooting.
LikeLike
It is saying that file is not opening..
LikeLike
Try clearing the temp folders and cache then retry
LikeLike
Thanks a lot,mary me please. ><
LikeLike
Thank you so much.
LikeLike
@nishant nath …AT89S51/s52 components not found in Proteus 7 library
LikeLike
i did the all things you said but it says bad key product . now what ll i want to do?
rply pls…………
LikeLike
Try the following :
1. Copy the crack folder to installation directory (as per process)
2. Temporarily disable the anti-virus (after disconnecting LAN/WAN/Wifi/Bluetooth)
3. Clean the temp memory (disk cleanup / cc cleaner /etc) and Retry process.
LikeLike
Hai Nishant Nath im using proteus 8 here also AT89S51/s52 components not found .is it possible to download these library seperatly?
if its possible please let me know.
thanks in advance
LikeLike
thanks bro
LikeLike
I installed proteus 8 , but when I open the project and want to add a device there is no device in library, seems my system not recognizes the files in library, my system is win 7- 64 bit , I crack the windows correctly andd there is nothing with that. now I do not know wht to do , I install some requirement net frame 3.5- 4 and microsoft visual 2005, 2008, 2010 x86), so what to do now?
LikeLike
Hi, I have installed the program but cannot Patch. I copied the folder to Program files as mentioned above and selected “ISIS.EXE” when asked for. An error message saying the file is in use appears. Pls suggest what to do
LikeLike
many many thanks brother…..for nice instruction.
LikeLike
THANK U SO MUCH………
LikeLike
cant download the patch
LikeLike
Great
It’s works !!
Thank you
LikeLike
Wow. . Thank you Very Nice trick I really Enjoyed.. Have a great day ahead its working
LikeLike
Thanks a lot this really helped us
LikeLike
thankssssssssssssssssssssssss alot……………………………………….. you sove my problem… May ALLAH give you reward of this nice help…. ameen
LikeLike
Works fine, thank you 🙂 but also experience it automatically shuts down, sometimes almost immediately, other times it takes a little time. No warning, just disappears. Running Windows 7 bit64
But just tried to run the patch again and sees in all it writes “CRC32 check failed! nothing patched!” but it writes patch complete at end
LikeLike
Thanks buddy, its working for me on windows 10 64 bit. You are great man of the poor nation…
LikeLike